Tenon saw - Groves

A steel backed, Richard Groves & Sons tenon saw.

The handle on this saw has three split nuts with brass medallion faces.One of the medallion faces has the markings  'Established 1770', which is 3/4" in diameter.

The left side of the steel back is marked 'R.Groves & Sons Sheffield, USE, Cast steel elastic spring temper warranted'.

The saw shown is 14 inches in length and has 12 teeth per inch, filed Ripcut.

In good clean condition.

Previous owners mark - J Burton.

Will require sharpening if intended for use.

item 1232