Old Tool Mart's latest news and information website blog

 RSS Feed

» Listings for September 2020

  1. Finally started sorting through the various English wooden planes - especially moulding planes - that I have been stacking up, over the past few years.
    With the good intentions of then listing them by Name of maker, the approximate years when made, what type of mould or pattern, the sizes or widths of the cut and of course their condition.
    The pile of boxes just kept growing, like Topsy!
    This week, I ventured into the darkness of one of my stores and started on the task in hand!!
    Initially it looks as though it will take a while, as around 1500 planes of all types and styes to go through.
    There are Hollows and Rounds, Side beads, Sash moulders,
    Complex moulds, Plough planes, Dado planes, Fillisters - both standing and moving,not forgetting
    Smoothing and Jacks and Jointers. Plus assorted other specialist ones.
    Also, lots of vintage cutting irons (most with cap irons), and many plough plane irons.
    Plow plane selection
    If anybody is looking for particular planes or the cutting irons, Please, contact  me, with your needs.
    BUT please do not expect an instant reply, since it will take a few days to go through it all, and respond to you!
    Selection wooden moulding and plow planes
  2. Sometimes, when going through a joiners chest of tools that I have purchased, I come across an 'oddity', or something that I have not seen before.

    This saw, is just such a tool.

    Aubin of Jersy box makers saw (600 x 339)

    It is marked "AUBIN'S PATENT No 17038", which is the British patent.

    Whilst the American patent is number 1,729,092, and was applied for by Percy Adrian Aubin, of St Aubin's, Jersey, Channel Islands, and is entitled "TENON SAW", dated September 1929.

    Aubins patent finger joint saw


    It has an unusual double blade, that resemble a side by side pair of hacksaw blades but with 14 teeth per inch and a metal clip at the top to hold them together. Each blade measures 8" center to center on the holes at each end.

    Next to that is the adjustable depth stop, with the two wingnuts on the main frame that allow adjustment of the fence up and down.

    Next to the adjustable fence is the fixed fence, with the unusual tapered shape to it, which allows easy engagement to proceed with the next cut.

    Apart from the lower horns of the handle having been trimmed off - presumably after being broken - its in very good condition, but would benefit from a light cleaning and fettling the handle back to original style.

    The saw looks like a cross between a tenon saw and a hacksaw with a nice open wooden handle and a bent steel frame; a guide fence is fixed alongside the cutting blade and registers into the previous cut.

    The adjustable stop controls the depth of cut, which needs to be a little more than the thickness of the wood in use. The guide fence has a toe piece at the front, making it possible to start each cut easily.

    If you have ever tried to cut combing joints by hand you will soon realise this joint is more suited to a machine, unlike the dovetail joint, which seems to lend itself to hand work. Maybe this is because the grain of wood is in-line whereas with a dovetail it is slightly across the grain

    finger joints in wood

    This is the perfect tool for cutting joints for small boxes or trays from wood about 1/4" thick or less. This very simple and easy to use saw would be so easy to make today, so why has no one thought of resurrecting Aubin's clever idea?